RH10014 Combined machine

High-end professional combined machine for gelato with two independent tanks

RH10014 is the professional floor-standing combined machine in the STAF59 SmartMix range, designed for laboratories working with very high volumes and wanting a machine capable of supporting the entire process with continuity, capacity and control. Its configuration remains true to the SmartMix identity: an upper tank for heating the mix and a lower tank for batch freezing, with an hourly output of 80 kg / 100 L, batch freezing from 4.5 to 20 L and a hot/cream cycle of 15 L.

Here, the two independent tanks express their full value. The laboratory can heat the mix in the upper tank while batch freezing is already taking place in the lower one, or use only one of the two according to requirements. This freedom makes the machine much more than a combined machine: it makes it a true operating centre for the process, capable of bringing together different stages with greater continuity and less fragmentation.

At this level, consistency of the final result is also extremely important. This is why ThermoDens has a central role: the G1-G7 programs allow texture to be guided from softer to more structured by reading gelato temperature and changes in product density in real time. RH10014 is therefore the highest-range SmartMix for those who are looking not only for production capacity, but for a machine that can combine hot processing, batch freezing and texture control within a more continuous and stable process.

Why choose RH10014

• High-end combined machine with two independent tanks
• 15 L hot phase and batch freezing up to 20 L
• Simultaneous or separate use of the two tanks
• Digital with inverter technology
• ThermoDens with G1-G7 programs

Who it is suitable for

RH10014 is suitable for those looking for:

• a professional combined machine for very high production volumes
• a machine with a genuinely integrated double tank
• a structured solution for gelato, sorbets and granitas
• greater continuity between the hot phase and batch freezing
• greater control over final texture even on substantial batches

FAQ

What is the production capacity of RH10014?

It has an hourly output of 80 kg / 100 L, with batch freezing from 4.5 to 20 L and a 15 L hot/cream cycle.

Can the two tanks be used independently?

Yes. They can operate together or be used individually depending on production requirements.

Why is the independence of the two tanks so important?

Because it gives freedom to the workflow and makes it possible to build a more continuous process between mix preparation and batch freezing.

Is ThermoDens useful even for an experienced laboratory?

Yes, because it does not replace experience: it supports it by making the process more linear and consistent.